این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Mining and Geo-Engineering، جلد ۵۹، شماره ۲، صفحات ۱۱۵-۱۱۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی The assessment of zinc precipitation from sulfate solutions using magnesium-rich ores
چکیده انگلیسی مقاله This study systematically investigates the mechanisms and optimization of zinc precipitation from sulfate solutions using magnesium-containing ores. The dominant reaction pathway leads to the formation of zinc hydroxysulfate (Zn5(OH)6(SO4)2) at moderate pH (4–6.5), as confirmed by a consistent final pH of 6.5 in all experiments. Temperature critically influences reaction kinetics, with 80 °C identified as optimal for maximizing zinc recovery (73.4 %) and ensuring effective magnesium participation in precipitation reactions. Process efficiency is governed by ore dosage, where 100 g/L of magnesium-rich ore yields peak zinc recovery, beyond which marginal improvements occur. Time-dependent studies reveal that 150 minutes represents the practical equilibrium for zinc precipitation at 80 °C, achieving 73.4% recovery with diminishing returns thereafter. Key findings demonstrate that controlled parameters—pH 6.5, 80°C, 150-min reaction time, and optimized ore dosage—collectively enhance zinc recovery while minimizing reagent consumption and energy costs. Under the optimized conditions (T = 80°C, ore dosage = 100 g/l, time = 150 minutes), the magnesium content demonstrated a significant reduction from 7.0 g to 5.1 g, corresponding to an absolute decrease of 1.9 g (27.1% decrement), which clearly indicates effective magnesium participation in the precipitation process, where the combination of elevated temperature and controlled ore dosage synergistically enhanced magnesium removal efficiency while minimizing residual content, ultimately contributing to improved process performance.
کلیدواژه‌های انگلیسی مقاله Zinc precipitation,Basic zinc sulfate,Magnesium-rich ore,Magnesium removal
نویسندگان مقاله Saeid Karimi |
Department of Metallurgy and Materials Engineering, Hamedan University of Technology, Hamedan, Iran.

Bahram Behnajady |
Research Centre of Advanced Materials, Faculty of Materials Engineering, Sahand University of Technology, Sahand New Town, Iran.

Javad Moghaddam |
Materials and Metallurgical Engineering Department, University of Zanjan, Zanjan, Iran.

نشانی اینترنتی https://ijmge.ut.ac.ir/article_102418_3b6c60a30453784593222256f780fc2f.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات