این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۸، شماره ۱۰، صفحات ۲۶۲۷-۲۶۴۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Multi-objective Optimization of the Bionic Blade in the Multi-blade Centrifugal Fan for Electric Vehicles Application Based on an Orthogonal Test
چکیده انگلیسی مقاله The multi-blade centrifugal fan, whose aeroacoustic properties significantly affect the noise, vibration and harshness performance of electric vehicles, is an important part of the automotive air conditioning system. A multi-blade centrifugal fan with a sawtooth trailing edge and a bionic blade is used. Multi-objective optimization of the bionic blade is investigated at the best efficiency point based on the orthogonal test to reduce sound pressure level (SPL) and ensure good aerodynamic performance. It is shown by the orthogonal test that the optimal combination of the three influencing factors is when the serration number, aspect ratio, and passivation ratio are 35, 1.5, and 0.2, respectively. The optimal model has 1.94% lower SPL than the original model, and the total pressure of both is basically unchanged. The presence of serration helps to mitigate vortex structures near the blade’s trailing edge. The dominant frequency is not influenced by the bionic blade and matches the frequency of blade passage. The maximum SPL is approximately 1,250 Hz for both models, with a maximum deviation of approximately 2.1 dB. The frequency bandwidth of the main noise source is between 1,250 and 1,600 Hz, showing a considerable difference between the two models. 
کلیدواژه‌های انگلیسی مقاله Multi-Blade Centrifugal Fan,Bionic blade,Electric vehicles,Orthogonal test,Sound pressure level,Total pressure
نویسندگان مقاله J. Tang |
Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, 310018, P. R. China

B. Huang |
Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, 310018, P. R. China

B. Huang |
Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, 310018, P. R. China

J. Wang |
Key Laboratory of Smart Thermal Management Science & Technology for Vehicles of Zhejiang Province, Zhejiang Yinlun Machinery Co., Ltd., Taizhou, P.R. China

X. Chen |
Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, 310018, P. R. China

X. Chen |
Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University, Hangzhou, Zhejiang, 310018, P. R. China

نشانی اینترنتی https://www.jafmonline.net/article_2736_534807cec82bd0983d70c515c2b0fc87.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات