این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 4 دی 1404
Journal of Computational and Applied Research in Mechanical Engineering - JCARME
، جلد ۱۴، شماره ۲، صفحات ۳۰۱-۳۲۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Comparative analytical study of thermal and thermo-hydraulic performance in solar air heaters with fins, baffles, porous matrix, and internal recycling
چکیده انگلیسی مقاله
This paper presents a comparative analytical investigation of five distinct configurations of single-pass flat plate solar air heaters (SAHs), incorporating fins, baffles, porous matrix, and internal air recycling. A steady-state, one-dimensional mathematical model was developed and solved analytically to evaluate both thermal and thermo-hydraulic performance under various mass flow rates and reflux ratios. The results indicate that using a porous matrix alone results in approximately 14% lower thermal efficiency compared to configurations with fins and baffles. Placing the matrix beneath the absorber plate improved thermal efficiency by about 1.5%, but reduced thermo-hydraulic efficiency by roughly 2.5% compared to placing it above. While combining enhancement techniques does not always yield superior performance, the SAH equipped with fins and baffles alone achieved the highest thermal and thermo-hydraulic efficiencies across most conditions. Furthermore, increasing solar radiation intensity and air mass flow rate enhanced useful heat gain, although higher pressure losses caused the thermo-hydraulic efficiency to decline at elevated flow rates. Overall, this study provides valuable insights into the optimal integration of thermal enhancement methods in solar air heaters for improved energy performance.
کلیدواژههای انگلیسی مقاله
Solar air heater,Porous Matrix,Fin and baffles,Upstream and downstream recycles,Thermo-hydraulic efficiency
نویسندگان مقاله
Fatemeh Karami |
Faculty of Mechanical Engineering, University of Kashan, Kashan 8731751167, Iran
Majid Sabzpooshani |
Faculty of Mechanical Engineering, University of Kashan, Kashan 8731751167, Iran
نشانی اینترنتی
https://jcarme.sru.ac.ir/article_2379_befba8f21420cb266ffe7552e79057fd.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات