این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
جمعه 21 آذر 1404
Journal of Applied Fluid Mechanics
، جلد ۱۸، شماره ۱۲، صفحات ۳۰۶۸-۳۰۸۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Aerothermal Characteristics of Trailing Edge Region Film Cooling on a Nozzle Guide Vane
چکیده انگلیسی مقاله
Maintaining the trailing edge of the first stage high-pressure nozzle guide vane (NGV) in high-temperature regions (̴ 2200K) is always a challenging task compared to the other locations. This paper investigates the aero-thermal characteristics of a nozzle guide vane (NGV) with an innovative film cooling configuration to optimize cooling performance in high-temperature environments. The study examines the effects of varying blowing ratios (0.69, 1.07, 1.67, and 2.06) on total pressure losses and cooling effectiveness by replacing traditional trailing edge ejection with two rows of film-cooling holes in the post-throat region. Computational analysis using ANSYS Fluent revealed that lower blowing ratios maintain better film attachment and increase total pressure losses with an increase in the blowing ratio up to 1.67 and a drop in the losses at higher blowing ratios (2.06) due to the increasing coolant jet momentum, better mixing with the mainstream due to jet lift-off. The 20% decrease in the total pressure losses using the novel film configuration compared to the trailing edge ejection signifies the study. These findings highlight the importance of optimizing blowing ratios and hole configurations to achieve efficient cooling without compromising aerodynamic performance, providing valuable insights for designing advanced cooling systems in gas turbine engines.
کلیدواژههای انگلیسی مقاله
Blowing ratio,Film cooling effectiveness,Total pressure loss coefficient,Suction surface,Nusselt’s number
نویسندگان مقاله
B. Gudla |
Mechanical engineering Department, Indian Institute of Petroleum and Energy, Visakhapatnam, Andhra Pradesh, 530003, India
A. K. Pujari |
Mechanical engineering Department, Indian Institute of Petroleum and Energy, Visakhapatnam, Andhra Pradesh, 530003, India
نشانی اینترنتی
https://www.jafmonline.net/article_2766_cc24c9c4bd40e0508d8e14d058110211.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات