این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Travel Medicine and Global Health، جلد ۲، شماره ۲، صفحات ۸۱-۸۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Health Technology Assessment of CAD/CAM in Dentistry
چکیده انگلیسی مقاله Introduction: Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) are the latest achievements of Prosthodontics and Restorative Dentistry. The aim of this research is to help make appropriate decision whether to use this technology in Iran. Methods: Studies were included in this review that compared Dental CAD/CAM with conventional restorative methods in terms of safety, efficacy and cost-effectiveness using Cochrane Library, CRD and Pub med. Results were analyzed using qualitative methods. Results: Six articles were used. Different indices of effectiveness in two types of application were found through the studies. Total failure rate for dental inlays was obtained as 0, 2.6% in 3 studies during a 4-year period and 1.75% in a 7-year period. It was 0.53% and 3.61% in two studies for prosthesis. Five-year survival rate for dental inlays was obtained from 91.6% to 100% and for prosthesis 72.2% to 100% in two studies. In terms of cost-effectiveness ratio of this technique compared to traditional methods, using ceramics fabricated along with chair side CAD/CAM is higher than traditional method; thus using it provides higher cost-effectiveness ratio than restoration by gold. Conclusion: This technology seems to be safe and effective and if this application is performed by specialists in the field of prosthetics, it will have favorable results. Although this HTA study confirmed the cost effectiveness of the dental CAD/CAM, economic evaluation of the technology in Iran is recommended for the future.
کلیدواژه‌های انگلیسی مقاله Cerec, Dentistry, Review
نویسندگان مقاله محمدرضا مبینی زاده |
young researchers and elites club, science and research branch, islamic azad university, tehran, iran
سازمان اصلی تایید شده: دانشگاه آزاد اسلامی علوم و تحقیقات (Islamic azad university science and research branch)

شیلا دعایی |
head of health technology assessment hta department, deputy of curative affairs, ministry of health and medical education, tehran, iran
سازمان اصلی تایید شده: وزارت بهداشت درمان و آموزش پزشکی (Ministry of health and medical education)

علیرضا اولیایی |
national institute for health research, tehran university of medical sciences, tehran, iran
سازمان اصلی تایید شده: دانشگاه علوم پزشکی تهران (Tehran university of medical sciences)

مهدی آزادبخت |
school of health management and information sciences, tehran university of medical sciences, tehran, iran
سازمان اصلی تایید شده: دانشگاه علوم پزشکی تهران (Tehran university of medical sciences)

مینا نجاتی |
standardization and tariff office, deputy of curative affairs, ministry of health and medical education. tehran, iran
سازمان اصلی تایید شده: وزارت بهداشت درمان و آموزش پزشکی (Ministry of health and medical education)

پریسا ابویی |
national institute for health research, tehran university of medical sciences, tehran, iran
سازمان اصلی تایید شده: دانشگاه علوم پزشکی تهران (Tehran university of medical sciences)

نشانی اینترنتی http://www.ijtmgh.com/article_33288_c539621b9ab74364bfd4beae2afb5456.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/351/article-351-376551.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات