این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemical Engineering، جلد ۱۴، شماره ۲، صفحات ۵۹-۷۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Fabrication and characterization of polycarbonate/titanium oxide nanotubes mixed matrix membranes for efficient removal of cadmium and copper from aqueous solution
چکیده انگلیسی مقاله In this study, novel polycarbonate-titanium oxide nanotubes (PC-TNT) ultrafiltration mixed matrix membranes (MMMs) were fabricated for decontamination of Cd2+ and Cu2+ metal ions from aqueous solution. The weight percent of TNTs in the polycarbonate membrane matrix was changed from 0 to 15. The synthesized neat PC membrane and PC-TNTs MMMs were characterized with respect to structural morphology and hydrophilicity using scanning electron microscopy (SEM) and water contact angle, respectively. The effects of TNTs loadings on the pure water flux, mean pore size, porosity and water contact angle of fabricated membranes and Cd2+ and Cu2+ heavy metal ion rejection were also studied. By increasing the loading of TNTs nanoparticles in the membrane matrix, the membrane mean pore size tended to increase, while the porosity decreased. Also, the increase in TNTs loading resulted in an increase in membrane water flux which was mainly attributable to the enhancement in mean pore size and partly caused by the decreased contact angle value (more hydrophilic). Of all the membranes studied, it was found by UF experiments that PC-TNT MMM was the most efficient material in heavy metal ions removal due to the superior adsorption capacity of TNTs material. The generic results revealed that TNTs material can be favorite candidates for MMMs preparation in order to be conveniently used in the Cd2+ and Cu2+ heavy metal ions decontamination from polluted water resources.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله m دلاور |
advanced membrane and biotechnology research center, faculty of chemical engineering, babol noshirvani university of technology, babol, iran
سازمان اصلی تایید شده: دانشگاه صنعتی نوشیروانی بابل (Babol noshirvani university of technology)

m حسینی |
faculty of chemical engineering, babol noshirvani university of technology, babol, iran
سازمان اصلی تایید شده: دانشگاه صنعتی نوشیروانی بابل (Babol noshirvani university of technology)

gh باکری |
advanced membrane and biotechnology research center, faculty of chemical engineering, babol noshirvani university of technology, babol, iran
سازمان اصلی تایید شده: دانشگاه صنعتی نوشیروانی بابل (Babol noshirvani university of technology)

نشانی اینترنتی http://www.ijche.com/article_46509_d809bd0ba91a8d6a692ff04fd1a3ba16.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/443/article-443-403995.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات