این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
سه شنبه 25 آذر 1404
تحقیق در علوم دندانپزشکی
، جلد ۱۴، شماره ۲، صفحات ۸۳-۹۰
عنوان فارسی
مقایسه اثر روش آماده سازی دستی با سیستم ProTaper برمیزان ضخامت عاج باقیمانده ریشه در ناحیه کرونال
چکیده فارسی مقاله
سابقه و هدف: هدف از این تحقیق مقایسه اثر آماده سازی کامل کانال ریشه با فایلهای روتاری ProTaper با روش متداول استفاده از فایل های دستی و دریلهای گیتس گلیدن یا GG بر روی ضخامت عاج باقیمانده ریشه و مساحت لومن کانال در ناحیه کرونال با استفاده از CT-SCAN بود. مواد و روشها: در این مطالعه تجربی تصادفی کنترل شده، تصاویر اولیه کانال های مزیالی 12 دندان مولر اول مندیبل توسط دستگاه Spiral CT-SCAN تهیه و ضخامت عاج در مقاطع 5،3،1 میلی متری و همچنین مساحت لومن در این مقاطع مورد بررسی قرار گرفت.نمونه ها به 2 گروه تقسیم شد.در یک گروه کانال MB با سیستم ProTaper و کانل ML به وسیله فایل های دستی و دریل های GG آماده گردید. در گروه دوم برعکس انجام شد. تصاویر بعد از آماده سازی از همان مقاطع تهیه شد. اندازه گیری ها انجام شد. نتایج به دست آمده به وسیله Independent T-test مورد ارزیابی قرار گرفت. یافته ها: در این بررسی ضخامت عاج باقی مانده در ناحیه خطر (DB/DL ) در مقطع 5 میلی متری در کانال های آماده شده با ProTaper به طور معنی داری بیشتر از روش دستی و GG بود .(04/0=P) همچنین اختلاف آماری معنی داری در میزان عاج برداشته شده در مقطع 1 میلی متری در سطوح دیستال (025/0=P) و ناحیه خطر (027/0=P) و در مقطع 3 میلی متری در ناحیه خطر دیده شد. (002/0=P) اختلاف آماری معنی داری در مساحت لومن ایجاد شده به وسیله دو روش دیده نشد. (05/0
کلیدواژههای فارسی مقاله
اینسترومنت روتاری Ni-Ti ،عاج ، Gates Glidden، ProTaper
عنوان انگلیسی
Comparison of the Effect of ProTaper and Gates-Glidden Drills On the Remaining Root Dentin Thickness at the Coronal Region of the Root
چکیده انگلیسی مقاله
Background and Aim: The purpose of this study was to evaluate residual dentin thickness of the root and the area of the canal lumen in the coronal region of the mesiobuccal and mesiolingual canals of the lower first molars after canal preparation with the common method of using hand files and Gates Glidden drills or ProTaper rotary files, by Spiral Ct-Scan. Materials and Methods: In this experimental randomized controlled study, primary images of mesial canals of 12 lower first mandibular molars were taken using Spiral CT-scan. The dentin thickness at the areas of 1,3 and 5 millimeter sections and lumen area at the same sections were measured. Samples were randomly divided into two groups. In one group the mesibuccal canal was prepared with ProTaper system and the mesiolingual canal with hand files and Gates Glidden drills. In the second group vice versa. Afterwards, images were taken from the same sections and Measurements were performed. The results were assessed using independent- T test. Results: In this study the remaining dentin thickness at the danger zone (distolingual/distobuccal) at the 5 millimeter section was significantly larger in the canals that were prepared with the ProTaper system than those prepared with hand instrumentation and Gates Glidden drills (P=0.04). Moreover, there was a statistical difference in the amount of dentin removed at the one millimeter sections on the distal areas (P=0.025) and danger zones (P=0.027) and in the 3 millimeter section of the danger zone (P=0.002). There was no statistically significant difference in the prepared lumen area between the two different approaches (p>0.05). Conclusion: According to the results of this study ProTaper system is a safer method compared to hand instrumentation and Gates Glidden drills, to be used for preparation of mesial canals of the lower first molars with 10-35 degrees and approximately equal radius.
کلیدواژههای انگلیسی مقاله
Ni-Ti Rotary instrument, dentin, Gates Glidden, ProTaper
نویسندگان مقاله
زهره خلیلک | z khalilak
dental branch, islamic azad university, tehran , iran
دانشگاه آزاد اسلامی واحد دندانپزشکی تهران
سازمان اصلی تایید شده
: دانشگاه آزاد اسلامی علوم و تحقیقات (Islamic azad university science and research branch)
مهدی وطن پور | m vatanpoor
dental branch, islamic azad university, tehran , iran
دانشگاه آزاد اسلامی واحد دندانپزشکی تهران
سازمان اصلی تایید شده
: دانشگاه آزاد اسلامی علوم و تحقیقات (Islamic azad university science and research branch)
شادی عصاره | sh assareh
postgraduate student, dept. of periodontics, school of dentistry, qazvin university of medical sciences, qazvin_iran
دانشگاه آزاد اسلامی دانشکده واحد دندانپزشکی قزوین
سازمان اصلی تایید شده
: دانشگاه علوم پزشکی قزوین (Qazvin university of medical sciences)
زینب موثق | z movasagh
دانشگاه آزاد اسلامی واحد دندانپزشکی تهران
نشانی اینترنتی
http://jrds.ir/browse.php?a_code=A-10-1189-1&slc_lang=en&sid=fa
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/227/article-227-408894.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
اندو
نوع مقاله منتشر شده
مطالعه اصیل
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات