این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۸، شماره ۴، صفحات ۵۴۵-۵۵۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Application of perfect mixing model for simulation of vertical roller mills
چکیده انگلیسی مقاله Vertical roller mills (VRMs) are well-established grinding equipment for various tasks in the coal and cement industry. There are few studies on simulation of VRMs. In this research work, application of perfect mixing model for simulation of a VRM in a cement grinding plant was investigated. Two sampling surveys were carried out on the VRM circuit. The samples and data from the first survey were used for the experimental determination of the breakage function and model calibration. The breakage distribution function of the material was determined by the compressed bed breakage test in a piston-die cell device. The model parameters were back-calculated using the feed and product size distribution data and the breakage distribution function. The model parameters obtained were used for simulation of the second survey and validation of the model. The simulation results showed that the simulated product size distribution curves fitted the measured product curves quite well.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله h شاهقلی |
department of mining engineering, lorestan university, khorramabad, iran
سازمان اصلی تایید شده: دانشگاه لرستان (Lorestan university)

k بارانی |
department of mining engineering, lorestan university, khorramabad, iran
سازمان اصلی تایید شده: دانشگاه لرستان (Lorestan university)

m یعقوبی |
nahavand cement company, nahavand, iran

نشانی اینترنتی http://jme.shahroodut.ac.ir/article_931_9f236ae5b2dd50d9ea3314b6b692245a.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/496/article-496-475081.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات