این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Agricultural Science and Technology، جلد ۹، شماره ۱، صفحات ۱۵-۲۳
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Terminal Velocity of Chopped Corn Silage and Its Separate Fractions as Affected by Moisture Content
چکیده انگلیسی مقاله Knowledge of the aerodynamic properties of agricultural materials is needed in equip-ment design for operations such as pneumatic conveying in loading/unloading operations of corn silage into/from silos. While considerable information is available on seed grains, little is known about the aerodynamic behavior of corn (Zea mays L.) silage. In this re-search, the weighed mean terminal velocity of a sample representative of the entire bulk mass was determined using Wolf and Tatepo’s method. The terminal velocity of various particle types (leaf, stalk and corncob pieces) of chopped forage corn plants, which were kept in silo for six months, at different moisture contents (40-50, 50-60 and 60-70% w.b.) was also studied. The terminal velocity was determined by measuring the air velocity re-quired to suspend a particle in a vertical air stream using a wind tunnel. A 3 3 factorial treatment arrangement with 30 replications in a completely randomized design was used to study the effect of moisture content and particle type on the terminal velocity. The mass mean terminal velocities of the corn silage at 40-50, 50-60 and 60-70% moisture con-tents were 7.1, 7.3 and 7.8 m/s, respectively. The results showed that only the effect of par-ticle type on the terminal velocity of corn silage was significant. The mean values of the terminal velocity of corn leaf, stalk and cob pieces were 3.8, 6.8 and 8.8 m/s, respectively. For each particle type at a given moisture content, the terminal velocity was best de-scribed by means of the equation of velocity squared in terms of weight.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله a همت |
agricultural machinery engineering department, college of agriculture, isfahan university of technology, isfahan, 84156, islamic republic of iran.
سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

m امامی |
agricultural machinery engineering department, college of agriculture, isfahan university of technology, isfahan, 84156, islamic republic of iran.
سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

سید جواد رضوی | s j
agricultural machinery engineering department, college of agriculture, isfahan university of technology, isfahan, 84156, islamic republic of iran.
سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

علی اکبر معصومی | a a
agricultural machinery engineering department, college of agriculture, isfahan university of technology, isfahan, 84156, islamic republic of iran.
سازمان اصلی تایید شده: دانشگاه صنعتی اصفهان (Isfahan university of technology)

نشانی اینترنتی http://jast.modares.ac.ir/article_4469_2d44fe9d1eca32c51fee37fe4d320012.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/476/article-476-495028.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات