این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Mining and Geo-Engineering، جلد ۵۱، شماره ۲، صفحات ۱۸۵-۱۹۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Evaluation of Cutting Performance of Diamond Saw Machine Using Artificial Bee Colony (ABC) Algorithm
چکیده انگلیسی مقاله Artificial Intelligence (AI) techniques are used for solving the intractable engineering problems. In this study, it is aimed to study the application of artificial bee colony algorithm for predicting the performance of circular diamond saw in sawing of hard rocks. For this purpose, varieties of fourteen types of hard rocks were cut in laboratory using a cutting rig at 5 mm depth of cut, 40 cm/min feed rate and 3000 rpm peripheral speed. Four major mechanical and physical properties of studied rocks such as uniaxial compressive strength (UCS), Schimazek abrasivity factor (SF-a), Mohs hardness (Mh), and Young's modulus (Ym) were determined in rock mechanic laboratory. Artificial bee colony (ABC) was used to classify the performance of circular diamond saw based on mentioned mechanical properties of rocks. Ampere consumption and wear rate of diamond saw were selected as criteria to evaluate the result of ABC algorithm. Ampere consumption was determined during cutting process and the average wear rate of diamond saw was calculated from width, length and height loss. The results of comparison between ABC's results and cutting performance (ampere consumption and wear rate of diamond saw) indicated the ability of metaheuristic algorithm such as ABC to evaluate the cutting performance.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله مسعود اخیانی |
department of mining, petroleum and geophysics, shahrood university of technology, shahrood, iran.
سازمان اصلی تایید شده: دانشگاه صنعتی شاهرود (Shahrood university of technology)

فرهنگ سرشکی |
associate professor, department of mining, petroleum and geophysics, shahrood university, shahrood, iran
سازمان اصلی تایید شده: دانشگاه شاهرود (Shahrood university)

رضا میکاییل |
assistant professor, department of mining and metallurgical engineering, urmia university of technology
سازمان اصلی تایید شده: دانشگاه ارومیه (Urmia university)

محمد تاجی |
department of mining engineering, shahrood branch, islamic azad university, shahrood, iran.
سازمان اصلی تایید شده: دانشگاه آزاد اسلامی علوم و تحقیقات (Islamic azad university science and research branch)

نشانی اینترنتی https://ijmge.ut.ac.ir/article_64322_97951a1e6eeafb44ec10a9ad1c944061.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/421/article-421-541036.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات