این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۵، شماره ۱، صفحات ۱-۱۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Simulation and Investigation of Mechanical and Geometrical Properties of St/CP-Titanium Bimetal Sheet during the Single Point Incremental Forming Process
چکیده انگلیسی مقاله In this study, the incremental forming of explosively welded low carbon steel-commercially pure titanium bilayer sheet has been experimentally and numerically investigated. For this purpose, at first a finite element based analysis was proposed to predict forming force and thickness distribution to form this material by such process, that showed good agreements with the experimental results. Then, to investigate the effect of vertical step down (ΔZ) parameter on the properties of the workpiece, mechanical tests and microstructural studies were performed on the formed specimens. The results showed that increasing the vertical step down (ΔZ), hardness and tensile properties of the specimens increased but the thickness reduction in the wall of the pyramidal specimens increased and also the surface quality decreased. In addition, microstructural studies showed that increasing the vertical step down from 0.1 to 0.3, the grain structure transformed from an equiaxed state to a fibrous state and led to formation of texture in the microstructure, which mechanical properties improvements can be attributed to this issue. Therefore, if the surface quality of the inside wall of the specimen won't be important, with an increase in the amount of ΔZ besides reduction of process time, the mechanical properties of the specimen will be improved.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله M.R. Sakhtemanian |
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran.

S. Amini |
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran.

M. Honarpishe |
Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran.

نشانی اینترنتی http://ijmf.shirazu.ac.ir/article_4824_f7cc0e5be43607cfad05f306f079fd45.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/453/article-453-639747.pdf
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات