این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
International Journal of Occupational Hygiene، جلد ۷، شماره ۳، صفحات ۱۱۰-۱۱۸
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Experimental Investigations on Electrospun Mat Production: For Use in High-Performance Air Filters
چکیده انگلیسی مقاله ORIGINAL ARTICLE Electrospun nanofibrous filter media have attracted considerable attention in the last decade. The present study aimed to develop the electrospun PAN (polyacrylonitrile) filter media through experimental investigations for application in high-performance air filters. For this purpose, an experimental design was proposed to assess the effect of electrospinning process conditions including solution concentration, electric voltage and nozzle-collector distance on the structural properties of filter media including the fiber diameter, percent of porosity and bead number. Optimization of electrospinning parameters was conducted through the Response Surface Methodology to obtain the desired values for fibrous media variables. The morphology of the mats (including bead number and fiber diameter) were studied using SEM images through, Microstructure Measurement image analyzer. The porosity was determined using image analysis algorithms by MATLAB. The findings indicated that the concentration is the most influencing factor on fiber diameter (r= 0.73, p< 0.05) and bead number (r= -0.51, p>0.05), so that the lower concentrations led to lower fiber diameter and more bead number. Among the electrospinning parameters, the highest correlation coefficient was achieved between porosity of PAN media and applied voltage (r=0.39, p>0.05). There was a negative relationship between fiber diameter and both percent of porosity (r=-23; p>0.05) and bead number(r=-0.53; p< 0.05). Thus, media with the lower fiber diameter had the higher porosity and more bead number. Since the fibers diameter, bead number and porosity can have different effects on the quality factor of filters, the well-considered selection of electrospinning conditions can be of great importance for obtaining the arbitrary values of filter characteristics.
کلیدواژه‌های انگلیسی مقاله Electrospinning,Polyacrylonitrile,Nanofiber,Filtration
نویسندگان مقاله سمیه فرهنگ دهقان | somayeh farhang dehghan
department of occupational health engineering, school of public health, tehran university of medical sciences, tehran, iran

سازمان اصلی تایید شده: دانشگاه علوم پزشکی تهران (Tehran university of medical sciences)

فریده golbaaei | farideh golbaaei
department of occupational health engineering, school of public health, tehran university of medical sciences, tehran, iran

سازمان اصلی تایید شده: دانشگاه علوم پزشکی تهران (Tehran university of medical sciences)

بزرگمهر مداح | bozorgmehr maddah
department of chemistry, imam hossein university, tehran, iran

سازمان اصلی تایید شده: دانشگاه جامع امام حسین (Imam hosseyn university)

رسول یاراحمدی | rasoul yarahmadi
department of occupational health, school of public health, iran university of medical sciences, tehran, iran

سازمان اصلی تایید شده: دانشگاه علوم پزشکی ایران (Iran university of medical sciences)

اصغر صدیق زاده | asghar sedigh zadeh
nuclear fusion research center, atomic energy organization, tehran, iran

سازمان اصلی تایید شده: سازمان انرژی اتمی (Atomic energy organization)

نشانی اینترنتی http://ijoh.tums.ac.ir/index.php/ijoh/article/view/121
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده Original Article(s)
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات