این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Medical Signals and Sensors، جلد ۲، شماره ۴، صفحات ۰-۰
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Extrapolation of Calibration Curve of Hot-Wire Spirometer Using a Novel Neural Network Based Approach
چکیده انگلیسی مقاله Hot-wire spirometer uses a constant temperature anemometer (CTA) for its operation. The working principle of CTA, used for the measurement of fluid velocity and flow turbulence, is based on convective heat transfer from a hot-wire sensor to a fluid being measured. The calibration curve of a CTA is nonlinear and cannot be easily extrapolated beyond its calibration range. Therefore, a method for extrapolation of calibration curve will be of great practical application. In this paper, a novel approach based on the conventional neural network method has been proposed to extrapolate CTA calibration curve for measurement range of 0.7-30 m/sec. Results show that using this approach, the standard deviation for the extrapolation of the CTA calibration curve beyond its upper limit is about -0.5%, which is acceptable in most cases. Moreover, the application of this approach for the extrapolation of the CTA calibration curve below its lower limit produces standard deviation of about 4.5%, which is acceptable in spirometery applications. Finally the standard deviation on the whole measurement range (0.7-30 m/s) is about 1.5%
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله محمد علی اردکانی | mohammad ali ardekani


وحید رضا نفیسی | vahid reza nafisi


فواد فرحانی | foad farhani


نشانی اینترنتی http://www.jmss.mui.ac.ir/index.php/jmss/article/view/101
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده Original Articles
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات