این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Dentomaxillofacil Radiology, Pathology and Surgery، جلد ۵، شماره ۱، صفحات ۲۴-۲۹
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی A Comparison of Heat Generation in Different Depths of Implant Drilling Site with and without a Sleeve
چکیده انگلیسی مقاله Introduction: The purpose of this study was to compare the heat generated from different depths of an implant drilling site with and without a sleeve. Materials and methods: In this study, 60 cortical bone samples were used and a load of 2.0 kg was applied. rilling for implant surgery, we used a diameter of 4.3 mm and a normal sleeve. Heat was measured from 3 different depths(3,6, and 9 mms). Data was analyzed with a three-way analysis of variance by Newman–Keulsmultiple comparison procedure. The significance level was set to a p-value of 0.05. Results: The mean maximum temperature with a sleeve was 35.4°C and without a sleeve was 34.5°C. Thermal rise was lowest in the sleeve group and highest in the sleeveless group. There was a significant difference between the sleeve and nonsleeve group (P= 0.002). There was also no significant differences between the different depths of the three measurements (P= 0.068). Conclusion: Within the scope of this invitro study, thermal rise during implant site preparation was lower in conventional drilling compared to the use of a sleeve. Hence, the difference was statistically significant.
کلیدواژه‌های انگلیسی مقاله Dental Implants, Dental Implantation, Temperature.
نویسندگان مقاله فریبرز وفایی | fariborz vafaee
department of prosthodontics, school of dental medicine, hamadan university of medical sciences umsha , hamadan, iran.

سازمان اصلی تایید شده: دانشگاه علوم پزشکی همدان (Hamadan university of medical sciences)

فرناز فیروز | farnaz firouz
department of prosthodontics, school of dental medicine, hamadan university of medical sciences umsha , hamadan, iran.

سازمان اصلی تایید شده: دانشگاه علوم پزشکی همدان (Hamadan university of medical sciences)

معصومه خوشحال خجسته زنجانی | masoumeh khoshhal khojasteh zanjani
department of periodontics, school of dental medicine, hamadan university of medical sciences umsha , hamadan, iran.

سازمان اصلی تایید شده: دانشگاه علوم پزشکی همدان (Hamadan university of medical sciences)

زهرا مشیری | zahra moshiri
department of prosthodontics, school of dental medicine, zanjan university of medical sciences zums , zanjan, iran.

سازمان اصلی تایید شده: دانشگاه علوم پزشکی زنجان (Zanjan university of medical sciences)

هادی رنجزاد | hadi ranjzad
department of prosthodontics, school of dental medicine, hamadan university of medical sciences uhsha , hamadan, iran.

سازمان اصلی تایید شده: دانشگاه علوم پزشکی همدان (Hamadan university of medical sciences)

نشانی اینترنتی http://3dj.gums.ac.ir/browse.php?a_code=A-10-1-94&slc_lang=en&sid=en
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده تخصصی
نوع مقاله منتشر شده پژوهشی
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات