این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 25 بهمن 1404
Iranian Journal of Materials Science and Engineering
، جلد ۸، شماره ۳، صفحات ۱۷-۲۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
FABRICATION AND CHARACTERIZATION OFHIGH PERFORMANCE CERAMIC MEMBRANE HAVINGNANOMETRE PORES
چکیده انگلیسی مقاله
Abstract: In this study, carbon nanotubes (CNTs) were grown directly in the pores of micro porous pyrex membranesand consequently ceramic membranes with very fine pores and high porosity were achieved. Our experiment was donein two stages. Initially cobalt powder with different percent was homogeneously mixed with pyrex powder. In order toproduce row membranes, each of these mixtures were compacted in the form of tablet by use of a uniaxial cold pressand in a stainless steel mould, and then the tablets were sintered at different temperature in an electric furnace. Insecond stage chemical vapor deposition (CVD) method was used to grow CNTs within the pores of the membranes.Argon and ammonia were used as carrier and reactive gas respectively and acetylene was used as the carbonfeedstock. Morphology of the membranes before and after CVD process was studied by scanning electron microscopy(SEM). After CVD process CNTs were grown in the pores of membranes and the pores size was decreased but totalporosity of the membrane was not changed considerably. In this way membranes with high porosity and fine pores werefabricated.
کلیدواژههای انگلیسی مقاله
CNTs, Nano Filter, porous membrane, SEM.
نویسندگان مقاله
a a حسینی | a a hosseini
1 department of physics, faculty of science, mazandaran university, university pardiss, babolsar, iran.
سازمان اصلی تایید شده
: دانشگاه مازندران (Mazandaran university)
a صدیق زاده | a sadigzadeh
2 nuclear science and technology research institute, nuclear science research school, tehran, iran.
سعید محمدی | s mohammadi
نشانی اینترنتی
http://ijmse.iust.ac.ir/browse.php?a_code=A-10-3-154&slc_lang=en&sid=en
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
گروه مهندسی مواد . مباحث ویژه
نوع مقاله منتشر شده
Research paper
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات