این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 25 بهمن 1404
Iranian Journal of Materials Forming
، جلد ۶، شماره ۱، صفحات ۴۴-۵۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Flow Stress Modeling In A γ/γ/ Cobalt Base Superalloy by Using Hyperbolic Sine Equation and ANN Method
چکیده انگلیسی مقاله
The new class of wrought γ-γ/ Co-base superalloys based on Co-Al-W system which have high volume fraction of γ/ precipitates and good mechanical properties was developed by conventional hot working routes. The aim of the present study was prediction of flow stress and hot deformation modeling of a novel γ-γ/ Co-base superalloy. The hot compression tests were carried out over a wide range of temperature (950°C-1200°C) and strain rates (0.001s-1-1s-1). The flow stress analysis, constitutive approach and microstructure characterization were revealed that dynamic recrystallization (DRX) was occurred at high temperature regime (1100°C-1200°C) but not at low temperature one (950°C-1050°C) due to presence of γ/ precipitates. The hot deformation characteristic was studied by hyperbolic sine equation on each abovementioned regimes and ANN approach on overall conditions. The constitutive method indicates good potential for the prediction of flow stress at any separated regimes but the ANN model represented much more appropriate performance. Outstanding predictability of ANN model regardless of γ/ phase participation during thermomechanical processing over all deformation conditions can be considered as another remark of proposed approach.
کلیدواژههای انگلیسی مقاله
نویسندگان مقاله
Gholam reza Ebrahimi |
Sabzevar, Iran
Saed Ali Akbari Sani |
Department of Materials Science and Engineering, Iran University of Sience and Technology, Tehran, Iran
Hossein Arabi |
School of Materials and Metallurgical Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran.
Shahram Kheirandish |
School of Materials and Metallurgical Engineering, Iran University of Science and Technology (IUST), Narmak, Tehran, Iran
نشانی اینترنتی
http://ijmf.shirazu.ac.ir/article_5200_1629823c26fc9f22a0312fbd54bfa778.pdf
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/453/article-453-1557036.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات