این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 2 اسفند 1404
مهندسی مکانیک مدرس
، جلد ۱۲، شماره ۳، صفحات ۹۵-۱۰۲
عنوان فارسی
مدلسازی رشد ترک در استوانه جدار نازک آلومینیومی تحت بارگذاری دتونیشن گازی با استفاده از المان چسبنده
چکیده فارسی مقاله
- در این مقاله به مدلسازی رشد ترک در یک استوانه جدار نازک تحت بارگذاری دتونیشن گازی پرداخته شده است. با توجه به مشکلات ناشی از بار متحرک و غیر خطی بودن مسئله، از روش المان محدود در این تحقیق استفاده شده است. ارتعاشات ناشی از اعمال بار متحرک با حل تحلیلی و نتایج آزمایشگاهی مقایسه و ارزیابی شده و از المان چسبنده با معیار خرابی کشش-جدایش جهت مدلسازی رشد ترک استفاده شده است. نتایج بدست آمده با نتایج قبلی که بر پایه معیار رشد زاویه بحرانی نوک ترک (CTOA) انجام گرفته مقایسه شده و مورد تحلیل قرار گرفته است.
کلیدواژههای فارسی مقاله
بار متحرک، روش المان محدود، مخازن تحت فشار،
عنوان انگلیسی
Crack Growth Modeling for a Thin Aluminum Tube under Gaseous Detonation Loading using Cohesive Element
چکیده انگلیسی مقاله
Abstract- This paper reports the finite element modeling of axial crack growth in a thin aluminum tube under gaseous detonation loading. The finite element method was used to handle the moving load and also the nonlinear characteristics of the problem. The simulation results were compared with the experimental results reported in the literature and also with the results obtained from an analytical model. Moreover, the cohesive element with traction-separation law was used for the crack growth modeling. The final part of the paper is devoted to comparisons between the numerical crack growth simulations obtained from the current work and the numerical results based on the CTOA criteria that were previously reported in the literature. The very good agreement between the two methods was indicative of the robustness of the implemented procedures. (this abstract seems a good description for this paper from the author point of view. please consider above text as abstract of this paper.)
کلیدواژههای انگلیسی مقاله
Moving Load, Finite element method, pressure vessels
نویسندگان مقاله
محمد ملکان |
دانشجو
مجید میرزایی |
عضو هیئت علمی دانشگاه تربیت مدرس
سازمان اصلی تایید شده
: دانشگاه تربیت مدرس (Tarbiat modares university)
نشانی اینترنتی
http://mme.modares.ac.ir/article_1495_17c8694b8989fa9ec5978c8c919b2d31.pdf
فایل مقاله
اشکال در دسترسی به فایل - ./files/site1/rds_journals/1256/article-1256-228962.pdf
کد مقاله (doi)
زبان مقاله منتشر شده
fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات