این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Materials Forming، جلد ۸، شماره ۴، صفحات ۴۶-۶۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی A Hybrid Method of NSGA-II and TOPSIS to Optimize the Performance of Friction Stir Extrusion
چکیده انگلیسی مقاله This study investigates the effect of friction stir back extrusion (FSBE) input parameters such as traverse speed, rotational speed, and wire diameter on the mechanical and microstructural properties of the produced wire. Numerous experiments were performed with different input parameters, and the grain size, hardness, and ultimate pressure strength (UPS) of each of the produced wires were investigated. In addition, to better understand the effect of input parameters, the process was simulated using the finite element method (FEM) model, and the temperature, material flow, and strain distributions in the wires were investigated. Then, using the artificial neural network (ANN), a relationship was obtained between the input parameters of the process, such as traverse speed, rotational speed, and wire diameter, with the mechanical and microstructural properties of the produced wires. This relationship was then used in a hybrid multi-objective optimization to find the optimal process parameters. Due to the higher importance of UPS in comparison to the grain size and microhardness, the weighting of 0.6, 0.2, and 0.2 were used in the TOPSIS model, and the optimum input parameters were achieved as 6 mm, 36.35 mm/min, and 456 rpm, for the traverse speed, rotational speed, and wire diameter, respectively.
کلیدواژه‌های انگلیسی مقاله FSBE, Modeling, Multi-objective optimization, TOPSIS method
نویسندگان مقاله Mostafa Akbari |
Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran

Parviz Asadi |
Advanced Materials Processing and Modeling Lab., Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University, Qazvin, Iran

Hossein Rahimi Asiabaraki |
Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran

نشانی اینترنتی https://ijmf.shirazu.ac.ir/article_6382_ef9a3ab28c04905a3e55d15b52574073.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات