این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Mining and Environment، جلد ۱۲، شماره ۴، صفحات ۹۶۹-۹۸۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Application of Stochastic Simulation in Assessing Effect of Particle Morphology on Fracture Characteristics of Sandstone
چکیده انگلیسی مقاله Indirect tensile testing is used in order to investigate the effect of particle morphology (shape and size) on the various weathering grade sandstone fracture characteristics. Several fracture characteristics are discussed in depth in this work including the fracture length (FL), fracture deviation area (FDA), fracture angle (FA), and fracture maximum deviation distance (FMDD). A tabletop microscope (TTM) is used to measure the particle morphology. The image analysis techniques induce the uncertainty-related particle shape and size. Therefore, the Monte Carlo simulation (MCS) is used in order to incorporate the inherent uncertainties-related particle morphology. The results obtained reveal that the sandstone fracture angle presents an unclear relationship with the particle shape and size. The effect of particle size on FL is completely obvious, and FL increases with the particle size. In contrast, the particle shape and size have an unclear relationship with the fracture characteristics. Furthermore, the sandstone porosity affects the fracture characteristics, which increase with the weathering grade. Moreover, the findings reveal that the Monte Carlo simulation is a viable tool for integrating the inherent uncertainties associated with the particle shape and size.
کلیدواژه‌های انگلیسی مقاله Particle morphology, Sandstone, fracture characteristics, Monte Carlo Simulation, weathering grade
نویسندگان مقاله K. Sultan Shah |
Strategic Mineral Niche, School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal, Penang, Malaysia.

M. H. Bin Mohd Hashim |
Strategic Mineral Niche, School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal, Penang, Malaysia.

H. Rehman |
Department of Mining Engineering, Baluchistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan.

K. S. Bin Ariffin |
Strategic Mineral Niche, School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, Nibong Tebal, Penang, Malaysia.

نشانی اینترنتی http://jme.shahroodut.ac.ir/article_2277_ffe1a979550aeb55be29826fbc5910f3.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات