این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Parasitology، جلد ۱۷، شماره ۴، صفحات ۵۰۶-۵۱۶
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Polymeric Approach to Adjuvant System in Antibody Production against Leishmaniasis Based on Hybridoma Technology
چکیده انگلیسی مقاله Background: Leishmaniasis is a zoonotic disease, which is one of the serious public health problems in the world. Nowadays, antibody production using hybridoma technology may be a correct approach in terms of sensitivity in the diagnosis of diseases such as leishmaniasis. The aim of this study was investigation of the effectiveness of different adjuvants on polyclonal antibody production against L. tropica based on hybridoma technique. Methods: Accordingly, Freund's adjuvant (1956, M. tuberculosis), as a classic adjuvant in studies, was used comparatively with the non-toxic polymeric based Polyoxidonium adjuvant. All animal immunization procedures were conducted at Bezm-i Alem University Experimental Animal Research Center. The adjuvant response was tested both in the serum sample and in the antibodies produced by the hybridomas. The antibody titers were determined with ELISA. Results: Freund’s and Polyoxidonium (PO) group blood titer’s increased approximately 5.5 fold compared to control after the 6th and 8th immunization. Hybridomas produced from mice immunized with PO adjuvant induced only antigen-specific antibody response and did not develop an immune response against the adjuvant. Conclusion: Adjuvant selection is very important in terms of the specificity of antibody responses of cells produced in hybridoma technology. Therefore, PO is recommended as a new adjuvant system in this study.
کلیدواژه‌های انگلیسی مقاله
نویسندگان مقاله | Asli Zorba Yildiz
1. Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, Istanbul, Turkey 2. Department of Medical Services and Techniques, School of Vocational of Healty, Istinye University, Istanbul, Turkey


| Gulnaz Yildirim Koken
1. Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, Istanbul, Turkey 2. Liv Hospital Regenerative Medicine and Stem Cell Production Center, Istanbul, Turkey


| Emrah Abamor
Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, Istanbul, Turkey


| Melahat Bagirova
1. Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, Istanbul, Turkey 2. Institute of the V. Akhundov National Scientific Research Medical Prophylactic, Baku, Azerbaijan Republic Biomedical


| Ozlem Tosyali
Department of Biomedical Engineering, Faculty of Engineering Architecture, Beykent University, Istanbul, Turkey


| Tanil Kocagoz
Department of Basic Sciences, Faculty of Medicine, Acibadem Mehmet Ali Aydinlar University, Istanbul, Turkey


| Adil Allahverdiyev
Department of Bioengineering, Faculty of Chemical and Metallurgical Engineering, Yildiz Technical University, Istanbul, Turkey 2. Institute of the V. Akhundov National Scientific Research Medical Prophylactic, Baku, Azerbaijan Republic
نشانی اینترنتی https://ijpa.tums.ac.ir/index.php/ijpa/article/view/3514
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات