این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
پنجشنبه 23 بهمن 1404
Energy Equipment and Systems
، جلد ۸، شماره ۱، صفحات ۹۱-۱۰۲
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations
چکیده انگلیسی مقاله
A successful cogeneration system design project needs an estimation of the economical parameters of the project, including capital investment, costs of fuel, expenses in maintenance and operating, and the proper cost for the products. This study describes the economic consideration of the benchmark cogeneration systems, called CGAM system located in the United States. To evaluate the profitability of alternative investments, cost estimation of the capital investment, calculation of the main product cost under the realistic assumption of fuel inflation, electricity inflation, and discount rate are required. Probabilistic analysis of lifetime discounted costs, including fuel and electricity cost changes, are defined by using the Monte-Carlo method for the next 20 years. Also, the total Revenue Requirement (TRR) method is selected as the main evaluation method for the economic model. As the result of calculations, the range of optimized value for inlet and outlet temperature of the combustion chamber, the efficiency of the gas turbine, efficiency and pressure ratio of air compressor in which the plant is economically and functionally in the best operation for the minimum cost of products of the cycle are achieved.
کلیدواژههای انگلیسی مقاله
Cantilever Beam,Piezoelectric,Surrogate Model,Deep Neural Network,Energy Optimization
نویسندگان مقاله
Mohammad Mahdi Rastegardoost |
School of Mechanical Engineering, College of Engineering, University of Tehran, Iran
Erfan Kosari |
Department of Mechanical Engineering, University of California, Riverside, CA, USA
Soroush Habibi |
School of Mechanical Engineering, College of Engineering, University of Tehran, Iran
نشانی اینترنتی
https://www.energyequipsys.com/article_39013_8ee516aaea7c9a33bb4fb55a11755e39.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات