این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Aerospace Science and Technology، جلد ۱۲، شماره ۲، صفحات ۱-۹
عنوان فارسی Analytical and Numerical Investigation of Effective Parameters on Energy Absorption Circular Composite Tube under Internal Pressure and Axial
چکیده فارسی مقاله In this paper the energy absorption capacity of stiffened circular composite tube is considered. The governing equations and dynamic equilibrium are first derived and then solved. Additionally, a finite element model of reinforced circular composite tube structure is modeled. At the following, the effects of various parameters such as structural geometry, number of rings and stingers on mechanical behavior of such tubes are considered. The Stiffened cylinder is under axial loading and internal pressure, and boundary conditions for both sides of the cylinder are considered as simple supports. Results show increasing in the amount of energy in the stingers while the number of stingers increases, and decreasing in the amount of total energy while the number of rings and stringers are increase. Total strain energy and the strain energy created in structural elements increase by increasing the ratio of radius to thickness. The analytical solution results are in good compatibility with the results achieved from the finite element method.
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Analytical and Numerical Investigation of Effective Parameters on Energy Absorption Circular Composite Tube under Internal Pressure and Axial
چکیده انگلیسی مقاله In this paper the energy absorption capacity of stiffened circular composite tube is considered. The governing equations and dynamic equilibrium are first derived and then solved. Additionally, a finite element model of reinforced circular composite tube structure is modeled. At the following, the effects of various parameters such as structural geometry, number of rings and stingers on mechanical behavior of such tubes are considered. The Stiffened cylinder is under axial loading and internal pressure, and boundary conditions for both sides of the cylinder are considered as simple supports. Results show increasing in the amount of energy in the stingers while the number of stingers increases, and decreasing in the amount of total energy while the number of rings and stringers are increase. Total strain energy and the strain energy created in structural elements increase by increasing the ratio of radius to thickness. The analytical solution results are in good compatibility with the results achieved from the finite element method.
کلیدواژه‌های انگلیسی مقاله Energy,Finite Element,Rings,Stringers,Deflection
نویسندگان مقاله Milad Noorabadi |
Composite Materials & Technology Center,Malek-Ashtar University of Technology

Rahnama Malihe |
Composite Materials & Technology Center,Malek-Ashtar University of Technology

Ghasemi Mohammad Amin |
Composite Materials & Technology Center,Malek-Ashtar University of Technology

Jafar Eskandari Jam |
Composite Materials & Technology Center,Malek-Ashtar University of Technology

نشانی اینترنتی https://jast.ias.ir/article_113350_1bdbb1f33e4ef63d2f84da323c20fe3e.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات