این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Journal of Applied Fluid Mechanics، جلد ۱۶، شماره ۹، صفحات ۱۷۷۸-۱۷۹۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی CFD Simulation of Air-Glass Beads Fluidized Bed Hydrodynamics
چکیده انگلیسی مقاله The hydrodynamic behaviour of air-glass beads bubbling fluidized bed reactor containing spherical glass beads is numerically studied, using OpenFoam v7 CFD software. Both Gidaspow and Syamlal-O'Brien drag models are used to calculate momentum exchange coefficients. Simulation predictions of pressure loss, bed expansion rate, and air volume fraction parameters were compared and validated using data, existing in the literature obtained experimentally and performed by other numerical softwares. Pressure loss and rate of bed expansion were calculated with relative root mean square error (RMSE) equal to 0.65 and 0.095 respectively; Syamlal-O'Brien model is considered more accurate than Gidaspow model. Hence, numerical model reliability developed on OpenFoam was also proved. The hydrodynamic aspect study of the fluidized bed reactor was then performed, to analyse the impact of inlet air velocity (U) on particles motion. It was revealed that with U increment, air and glass beads axial velocities increase in the reactor centre and decrease in the sidewalls. Thus, a greater particle bed expansion is induced and the solid particles accumulated highly on the reactor sidewalls. In general, with the increase of U, the solid volume fraction decreases from 0.63 to 0.58 observed at 0.065 m/s and 0.51 m/s, respectively.
کلیدواژه‌های انگلیسی مقاله CFD modelling, Eulerian-Eulerian approach, Fluidized bed reactor, Hydrodynamic, Multiphase flow, OpenFOAM
نویسندگان مقاله S. Aboudaoud |
Research team, Modeling of Energy Systems, Mechanical Materials and Structures, and Industrial Processes (MOSEM2PI), Mohammadia School of Engineers, Mohammed V University in Rabat, P. O. Box 765 Agdal, Rabat, Morocco

S. Touzani |
Research team, Modeling of Energy Systems, Mechanical Materials and Structures, and Industrial Processes (MOSEM2PI), Mohammadia School of Engineers, Mohammed V University in Rabat, P. O. Box 765 Agdal, Rabat, Morocco

S. Abderafi |
Research team, Modeling of Energy Systems, Mechanical Materials and Structures, and Industrial Processes (MOSEM2PI), Mohammadia School of Engineers, Mohammed V University in Rabat, P. O. Box 765 Agdal, Rabat, Morocco

A. Cheddadi |
Research team, Modeling of Energy Systems, Mechanical Materials and Structures, and Industrial Processes (MOSEM2PI), Mohammadia School of Engineers, Mohammed V University in Rabat, P. O. Box 765 Agdal, Rabat, Morocco

نشانی اینترنتی https://www.jafmonline.net/article_2260_4213f7688eb971d2b3a38f524f8558e8.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات