این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
سه شنبه 28 بهمن 1404
Journal of Applied Fluid Mechanics
، جلد ۱۲، شماره ۶، صفحات ۲۰۳۹-۲۰۵۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Theoretical, Numerical and Experimental Investigation of Secondary Injection with a Novel Pyrogenic Pulser
چکیده انگلیسی مقاله
In this paper, a novel pyrogenic pulser was designed both analytically and numerically and evaluated with empirical tests. The motivation of this study was the need for active control of the aero acoustic pressure oscillations by injecting the secondary flow into the solid rocket motor. First, in brief, pyrotechnic and pyrogenic pulsers have been introduced, and then analytical governing equations have been presented in three transient, sinusoidal and Hercules methods. In order to understand the internal pressure of the pulsar and its plume length, the injection flow field has been evaluated using the ANSYS-Fluent software with both k-ω SST and k-ε Realizable models both at ambient and motor pressure. After that, the design and manufacturing of the pulser hardware and the test process have been described. Finally, analytical, numerical and experimental results have been discussed. The results show that there is a good correlation between the transient analysis in theory and the numerical solution by the k-ω SST model and the empirical test data. In addition, pyrogenic pulsers design depends on various parameters of motor and pulser charge performance prediction. The quality of pulser charge bonding to its insulator and erosion of its throat path due to injection have an important role to obtain a desirable pulser mass flow rate and plume length.
کلیدواژههای انگلیسی مقاله
Pyrogenic pulsers, Secondary injection, Solid rocket motors
نویسندگان مقاله
R. Taherinezhad |
Department of Mechanical Engineering, University of Guilan, Rasht, 51665-315, Iran
G. Zarepour |
Department of Mechanical Engineering, University of Guilan, Rasht, 51665-315, Iran
نشانی اینترنتی
https://www.jafmonline.net/article_897_4b4e7dc374270761bb7adad8f1916e45.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات