این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
صفحه اصلی
درباره پایگاه
فهرست سامانه ها
الزامات سامانه ها
فهرست سازمانی
تماس با ما
JCR 2016
جستجوی مقالات
شنبه 2 اسفند 1404
Journal of Applied Fluid Mechanics
، جلد ۹، شماره ۵، صفحات ۲۵۴۵-۲۵۵۷
عنوان فارسی
چکیده فارسی مقاله
کلیدواژههای فارسی مقاله
عنوان انگلیسی
Numerical Analysis of Turbocharger’s Bearing using Dynamic Mesh
چکیده انگلیسی مقاله
Journal bearings are widely used in different machineries. Reynolds equation is the governing equation to predict pressure distribution and load bearing capacity in journal bearings. There are many analytical and numerical methods for solving this equation. The main disadvantage of these methods is their inability to analyze complex geometries. In this paper, a comprehensive method based on dynamic mesh method is developed to solve the conservation equations of mass, momentum and energy. This method has smaller error compared to other techniques. To verify the accuracy of this method, the bearings with different length to diameter ratios are analytically and numerically analyzed under different loads and compared with each other. In continue, the turbocharger’s bearing is numerically simulated and the effects of rotational speed change are studied. Finally, the turbocharger’s bearing with four axial grooves are simulated. The simulations results show that adding grooves to the turbocharger’s bearing causes the bearing eccentricity ratio and lubricant flow rate to increase and the attitude angle, rate of temperature rise and frictional torque to decrease.
کلیدواژههای انگلیسی مقاله
Journal bearing, Turbocharger’s bearing, Axial groove, Analytical solution, Dynamic mesh
نویسندگان مقاله
J. Moradi Cheqamahi |
Department of Mechanical Engineering1, Isfahan University of Technology, Isfahan, Iran 84156-83111
M. Nili-Ahmadabadi |
Department of Mechanical Engineering1, Isfahan University of Technology, Isfahan, Iran 84156-83111
S. Akbarzadeh |
Department of Mechanical Engineering1, Isfahan University of Technology, Isfahan, Iran 84156-83111
M. Saghafian |
Department of Mechanical Engineering1, Isfahan University of Technology, Isfahan, Iran 84156-83111
نشانی اینترنتی
https://www.jafmonline.net/article_1822_702878d277f10b65fc6ed9fb7ab1a456.pdf
فایل مقاله
فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده
en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به:
صفحه اول پایگاه
|
نسخه مرتبط
|
نشریه مرتبط
|
فهرست نشریات